FE Series - Front End Dump Truck Cylinder
Our trunnion-type FE cylinders are both lightweight and durable, requiring no maintenance, and provide excellent stability for tippers.
Welcome to explore HCIC solution for tipping trucks.
Product Introduction
Contact
Us
Solution
Please trust our technology, we will continue to develop new products to meet your needs!
hydraulic cylinder for agriculture equipment
Our hydraulic cylinders are engineered to meet the rigorous demands of farming equipment, ensuring seamless operation in planting, harvesting, and material handling.
Built to withstand extreme conditions – from dusty fields to muddy terrain – these cylinders deliver unmatched power and precision to keep your operations running smoothly, season after season.
Log Splitter Hydraulic Cylinder
HCIC has several cylinder models and can provide custom cylinder as your request.
HCIC has the experience and knowledge to offer you the right equipment for your job.
HTC- Hydraulic Telescopic Cylinder
Product Description
- The FE Series is a front-end telescopic cylinder range for straight headboard dump trucks.
- The range uses a telescopic and trunnion-cylinder design. Buyers should select the configuration by comparing the truck body, tipping geometry, mounting structure, required stroke, bore, stage count, and hydraulic system requirements.
Technical Specification
Check the details of FE series product to meet your specific industry need.

| Model | Tipping capacity (t) | Pressure (MPa) | Bore Diameter (mm) | A (mm) | B (mm) | C (mm) | D (mm) | δ (mm) | L(mm) Closed length |
|---|---|---|---|---|---|---|---|---|---|
| FE‑3TG‑E149*3880 | 28.3 | 16 | 158/136/115 | 201 | 331 | 135 | 50 | 42 | 1697 |
| FE‑3TG‑E149*4090 | 28.3 | 16 | 158/136/115 | 201 | 331 | 135 | 50 | 42 | 1732 |
| FE‑4TG‑E149*4280 | 28.3 | 16 | 158/136/115/95 | 245 | 385 | 70 | 50 | 50 | 1345 |
| FE‑4TG‑E149*4650 | 28.3 | 16 | 158/136/115/95 | 201 | 331 | 100 | 50 | 42 | 1546 |
| FE‑4TG‑E149*4940 | 28.3 | 16 | 158/136/115/95 | 201 | 331 | 100 | 50 | 42 | 1499 |
| FE‑4TG‑E169*4280 | 49 | 16 | 169/158/136/115 | 245 | 385 | 70 | 50 | 50 | 1345 |
| FE‑4TG‑E169*4620 | 49 | 16 | 169/158/136/115 | 245 | 385 | 70 | 50 | 50 | 1479 |
| FE‑4TG‑E169*5180 | 49 | 16 | 169/158/136/115 | 245 | 385 | 70 | 50 | 50 | 1604 |
| FE‑5TG‑E169*5780 | 49 | 16 | 169/158/136/115/95 | 245 | 385 | 70 | 50 | 50 | 1559 |
| FE‑5TG‑E169*6180 | 49 | 16 | 169/158/136/115/95 | 245 | 385 | 70 | 50 | 50 | 1505 |
| FE‑6TG‑E169*6060 | 49 | 16 | 169/158/136/115/95/70 | 245 | 385 | 70 | 50 | 50 | 1240 |
| FE‑6TG‑E169*6060 | 49 | 16 | 169/158/136/115/95/70 | 245 | 385 | 70 | 50 | 50 | 1240 |
| FE‑5TG‑E191*6180 | 64 | 16 | 191/169/158/136/115 | 270 | 400 | 100 | 50 | 42 | 1497 |
| FE‑5TG‑E191*6350 | 64 | 16 | 191/169/158/136/115 | 270 | 400 | 100 | 50 | 42 | 1673 |
How to Select an FE Series Cylinder?
Bore and Required Load Review
Confirm the load calculation, tipping geometry, and selected FE Series cylinder specification for each project.
The listed page information does not establish one load rating for the full range.
Stroke and Tipping Geometry
Match the required tipping angle and body movement with the selected stroke. Review the closed length, extended movement, frame clearance, pivot locations, and interference points throughout the lifting cycle.
A telescopic cylinder for straight headboard dump truck applications must be checked against the actual truck drawing. Do not select a model by stroke alone without confirming the complete mechanical layout.
Stage Count and Installation Length
Use the 3-stage, 4-stage, or 5-stage configuration to compare available installation length and required extension.
Confirm how the selected stages affect the closed dimension, mounting position, and operating clearance.
Trunnion Mounting and Installation Review
Trunnion Dimensions
A trunnion mounted hydraulic cylinder requires a clear check of the top and bottom trunnion ID, OD, mounting width, support structure, and alignment. Confirm the measurement references and tolerances before machining the truck frame or brackets.
Review the cylinder centerline, trunnion support, pivot movement, and load path with the complete tipping mechanism. Correct alignment should be confirmed through the installation drawing rather than assumed from a product image.
Hydraulic Connection and Tipping System
Confirm the hydraulic circuit, pressure requirement, flow requirement, hose routing, connection details, relief settings, and cylinder mounting position before installation.
Review the cylinder with the pump, valve, reservoir, hoses, truck frame, and tipping body as one system.
FE Series Drawing and Quality Confirmation
Technical Drawing Review
Before production, confirm the model, bore, stroke, stage count, closed length, top and bottom trunnion dimensions, hydraulic requirements, and drawing revision for the selected FE Series configuration.
Review all project-specific dimensions against the approved drawing. If a dimension, pressure value, unit, or application condition is unclear, resolve it before production preparation.
Final Order Checks
Before shipment, compare the model, configuration, quantity, visible condition, packaging, and required documents with the approved order information. Confirm any custom dimension or mounting change against the latest drawing revision.
Do not treat a product image, general series description, or another model’s data as a substitute for the final technical specification.
Product Gallery
