FEE Telescopic Front-End Hydraulic Cylinder
Product Introduction
Contact
Us
Solution
Please trust our technology, we will continue to develop new products to meet your needs!
hydraulic cylinder for agriculture equipment
Our hydraulic cylinders are engineered to meet the rigorous demands of farming equipment, ensuring seamless operation in planting, harvesting, and material handling.
Built to withstand extreme conditions – from dusty fields to muddy terrain – these cylinders deliver unmatched power and precision to keep your operations running smoothly, season after season.
Log Splitter Hydraulic Cylinder
HCIC has several cylinder models and can provide custom cylinder as your request.
HCIC has the experience and knowledge to offer you the right equipment for your job.
HTC- Hydraulic Telescopic Cylinder
Product Specification
FEE telescopic front-end hydraulic cylinders are designed for dump truck tipping systems that require long lifting strokes and high lifting force. The multi-stage design allows the cylinder to extend significantly while maintaining a relatively compact retracted length.
The FEE series shown here includes 5-stage and 3-stage configurations, with a rated system pressure of 16 MPa according to the supplied technical specifications. Different models are available for different lifting requirements, stroke lengths and mounting dimensions.
HCIC supports OEM and custom manufacturing based on technical drawings, existing cylinder samples or specified dimensions. Bore configuration, stroke, number of stages, mounting dimensions, oil port configuration, seals and surface treatment can be customized according to the application.
Ket Features
1. Multi-Stage Telescopic Construction
The FEE cylinder uses a multi-stage telescopic structure to provide a long extension stroke while keeping the retracted cylinder length relatively compact.
2. Designed for Front-End Tipping
The cylinder is designed for front-end tipping systems used on dump trucks and other heavy-duty tipping equipment.
3. 3-Stage and 5-Stage Configurations
The supplied technical data includes both 3-stage and 5-stage FEE configurations for different lifting requirements.
4. 16 MPa Working Pressure
The listed FEE models in the supplied technical table are specified at 16 MPa.
5. Different Lifting Capacities
The supplied models cover different rated lifting-weight configurations, allowing the cylinder to be selected according to the tipping system.
6. Long Stroke Capability
The telescopic construction allows different extended lengths to be configured for different dump body geometries.
7. OEM Customization
Cylinder dimensions and mounting configurations can be manufactured according to customer drawings, samples or technical requirements.
8. Pressure Testing
Finished cylinders can be inspected and pressure tested before shipment according to the agreed technical requirements.
How to Choose The Right FEE Telescopic Cylinder?
Selecting an FEE telescopic cylinder requires more than matching the cylinder diameter.
1. Check the Required Lifting Force
Start with the dump body geometry, hydraulic pressure and required lifting force.
Do not select a cylinder based only on the payload of the truck.
2. Check Working Pressure
The cylinder should match the hydraulic system pressure.
The FEE models listed on this page are specified at 16 MPa according to the supplied technical data.
3. Determine the Required Stroke
The required extension depends on:
*Dump body length
*Required tipping angle
*Cylinder mounting position
*Front mounting geometry
4. Choose the Number of Stages
A 3-stage cylinder and a 5-stage cylinder can provide different combinations of stroke and retracted length.
A 5-stage configuration may be suitable where a long extension is needed while installation space is limited.
5. Check Closed Length
The retracted length is critical because the cylinder must fit within the available installation space.
6. Check Mounting Dimensions
Before ordering, confirm:
*Pin diameter
*Mounting distance
*Front mounting configuration
*Connection dimensions
*Oil port position
7. Check Hydraulic Connections
The supplied models use different port configurations, including SAE16 and NPT1.
The replacement cylinder should match the hydraulic system connection.
8. Confirm the Original Cylinder Model
For replacement projects, providing the original model number can significantly simplify specification matching.
Product Specification

| Model | Lifting Weight (ton) | Pressure (MPa) | Diameter at Levels | A (mm) | C (mm) | N (mm) | Y (mm) | Z (mm) | M (mm) | P | L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FEE-5TG-E191*4826 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1357 |
| FEE-5TG-E191*5588 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1524 |
| FEE-5TG-E191*5969 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1585 |
| FEE-5TG-E191*6477 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1700 |
| FEE-5TG-E191*6883 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1760 |
| FEE-5TG-E191*7137 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 52.3 | 52.3 | 42 | 60 | SAE16 | 1819 |
| FEE-5TG-E191*5780 | 51.3 | 16 | 200/175/152/130/110 | 245 | 231 | 50 | 50 | 42 | 70 | NPT1 | 1550 |
| FEE-3TG-E110*2755 | 15.5 | 16 | 110/90/70 | 168 | 132 | 51 | 50 | 42 | 70 | NPT1 | 1304 |
| FEE-3TG-E149*3680 | 29.6 | 16 | 152/110/90/70 | 219 | 178 | 50 | 50 | 42 | 70 | NPT1 | 1304 |
FEE Cylinder Replacement
If you are replacing an existing front-end telescopic cylinder, providing the original cylinder information can help reduce specification errors.
Please provide as many of the following details as possible:
* Original cylinder model
* Overall length
* Retracted length
* Extended length
* Number of stages
* Cylinder diameter
* Mounting dimensions
* Pin diameter
* Oil port type
* Oil port position
* Working pressure
* Photos of the existing cylinder
* Vehicle or dump body information
Product Gallery
